Description
Moisture Master is a state of the art meter capable of measuring the moisture content of various substrates using both pad and pin sensors.
Relative function can be used to obtain comparative readings above and below a set datum.
Bright traffic light series of LEDs display instant visual information and a numerical readout is available for recording specific readings.
Contained within the security case the unit sensor probe is permanently attached to the meter and there are no other costly auxiliary attachments required that can be mislaid or lost.
The unit is contained inside a high visibility Peli security case
The Pad Sensor
Using advanced capacitive power-loss techniques the moisture content can then be assessed for various substrates. This is displayed using green, red and yellow LEDs, and also numerically as a % moisture content. An audio signal is also activated in the amber and red zones.
- Non-destructive.
- Large areas can be covered quickly
- Minimal affect from dissolved salts
- Variations in electrical properties will e largely averaged out over the field generated by the pad.
The Pin Sensor
The pins are pushed into the substrate and measures DC resistance between the pins.
- Can be used in confined spaces
- Not affected by uneven surfaces
There may be slight variations in readings because the pad will give an average reading over a large area, whereas pins will give the highest reading in contact with the pins. For this reason, the pad sensor is considered more accurate.
Benefits and features
- Robust construction
- 1 Year warranty
- Repair service available
Reviews
There are no reviews yet.