OPENING HOURS - MON-FRI 9am-5pm - 0845 769 7400

Tile Grouts

For home designers and decorators, tile grout is often an afterthought. But in fact, good quality grout is often the key to a successful project. As well as floor tile grout and wall tile grout, many specialist grouts are used in industry and construction for everything from ship repairs to soundproofing.

In homes and workplaces, grouts are mostly used for filling gaps, sealing surfaces and providing structural support for tiles. Although there are grouts designed to be permeable (see our paving grout) the defining quality of most domestic grouts is water resistance. They are crucial for sealing the surface from water, chemicals and impacts.

Sovereign Wall Tile Grout is a polymer modified cementitious joint filler for joints up to 3mm wide. Application is very easy using a simple sponge or squeegee, and it is sufficiently water-resistant to be used outdoors as well as indoors. With an additional sealant such as Sovereign SBR bonding agent, it can also be used in fully submerged locations such as fish ponds and swimming pools.

Floor tile grout needs a heavier duty bedding material to support the weight of people and furniture and requires greater resistance to dirt ingress, moulds and fungus. It also helps if it is flexible, especially above floor timbers. Sovereign Anti-Mould Grout is a flexible joint filling compound suitable for both floors and walls and comes in a range of colours. It can fill joints up to 15mm in width and can be used outdoors as well as indoors. You can also use it above under-floor heating.

Before tiling any surface, remember to pre-seal it with Sovereign Watertite liquid membrane.

Read More
per page
Flexi Anti-Mould Wall and Floor Grout

Sovereign Anti-Mould Grout is a flexible joint filling compound suitable for walls and floors in joints up to 15mm wide. It dries to a hard, durable, shrink resistant, mould resistant and water resistant finish, suitable for interior and exterior use.

Key Features
Wall Tile Grout (White)

Sovereign Wall Tile Grout is a cement-based polymer modified joint filling compound for tile joints up to 3mm wide around all types of ceramic floor and wall tiles. Wall Tile Grout is formulated to provide a non-slump, readily compactible grouting slurry, which can be easily applied across all types of ceramic tiled surfaces using a sponge or rubber squeegee.

Key Features
per page