Sovereign Porcel-Flex Rapid is specially formulated for the rapid fixing of ceramic floor and wall tiles both internally and externally. With built in flexibility an adhesion promoter is it ideal for fixing direct to timber floors and for areas that may be subject to vibration. Suitable for the use in conjunction with under floor heating. It's rapid setting formula allows for light foot traffic after 2-3 hours. Conforms to the requirements of BS EN 12004 Type C2 FT S1
Form Supplied: Dry powder
Pack Sizes: 20kg
Colour Range: Grey & White
Coverage Rate: Fixes approximately 5 – 9 m² per bag depending on trowel used.
Storage: This product must be stored under cover, in unopened bags clear of the ground in cool dry conditions, protected from frost and excessive draught. When stored correctly, as above, and used within 6 months of the date shown on this packaging, the activity of the reducing agent added will be maintained and this product will contain, when mixed, no more than 0.0002% (2ppm) soluble chromium (VI) of the total dry weight of the cement.
Suitable for fixing all types of tiles including porcelain, fully vitrified, marble, mosaics, terrazzo, brick slips, natural and artificial stone, concrete tiles and lightweight polystyrene to most building materials without the need for expensive additives. It is suitable for use as both a thin and thick bed adhesive.
NOTE: Pale coloured marble/porcelain can be translucent and dark coloured adhesive can sometimes show through. If in doubt we would recommend tiling a small trial area or use the white grade of Porcel-Flex