An easy to apply one-coat, anhydrite based, plaster which dries to give a hard, smooth, white and durable finish.
Applies like a backing plaster yet closes and finishes like a finishing plaster. Easy to decorate, readily accepting all water based paint systems. Single coat application with the facility to re-temper for up to 2 hours thus reducing wastage.
Also suitable for use on top of meshed membranes in a two coat application.
Advantages of Whitewall Onecoat:
- Single coat application
- Smooth white finish
- Hard and durable
- Easy to decorate
- Reduces waste
- Suits most backgrounds
- Quality assured
Form Supplied: Powder
Packaging: 25kg powder. Keep dry
Coverage Rate: 2.5m² per 25kg bag at 10mm thickness
Colour Range: White
Shelf life: Minimum of 3 months when properly stored and could be over 6 months subject to temperature and humidity
Contains: Blend of plaster and speciality additives
Whitewall is an anhydrite based plaster that applies like a backing plaster yet closes and finishes like a finishing plaster. The smooth, white finish surface is hard, durable and easy to decorate, readily accepting all water based paint systems.
Single coat applications dramatically reduce labour costs, whilst the ability to retemper for up to 2 hours reduces wastage and provides further savings.
Ideal for all normal backgrounds including common brick, engineering brick, aerated concrete block, lightweight aggregates, fairfaces and common dense concrete blocks.